Bubble formation at a flexible orifice with liquid cross-flow - Groupe INSA Accéder directement au contenu
Article Dans Une Revue Chemical Engineering and Processing: Process Intensification Année : 2004

Bubble formation at a flexible orifice with liquid cross-flow

Résumé

In wastewater treatment, biological processes for denitrification and nitrification are performed using oxidation ditches. In these reactors, the mixing and the aeration functions are dissociated: a bubble cloud is generated from flexible membrane spargers and is subjected to a horizontal liquid flow. The objective of this paper is to study the effects of the liquid cross-flow on the bubble formation at a single flexible orifice in water. The several forces acting on the forming bubble have been modelled in order to understand the dynamics of the bubble growth and detachment. The bubble detachment is controlled by the drag force due to the liquid motion and not by the buoyancy force. The experimental analysis of the bubble growth has shown that, under liquid cross-flow conditions, the bubbles move downstream and are flattened during their growth (position of the bubble centre of gravity, bubble inclination angle). The bubbles spread over the orifice surface, and the advancing and the receding bubble angles were measured. The detached bubbles have significantly smaller sizes and higher frequencies when compared to bubble formation under quiescent liquid conditions.
Fichier principal
Vignette du fichier
loubiere_3172.pdf (402.47 Ko) Télécharger le fichier
Origine : Fichiers produits par l'(les) auteur(s)

Dates et versions

hal-03764136 , version 1 (13-10-2023)

Identifiants

Citer

Karine Loubière, Vincent Castaignède, Gilles Hébrard, Michel Roustan. Bubble formation at a flexible orifice with liquid cross-flow. Chemical Engineering and Processing: Process Intensification, 2004, 43 (6), pp.717-725. ⟨10.1016/S0255-2701(03)00017-5⟩. ⟨hal-03764136⟩
30 Consultations
10 Téléchargements

Altmetric

Partager

Gmail Facebook X LinkedIn More